Skip to content
Satevis BeanAir® Sensors BrandRethinking Smart Infrastructure
Go to content

CRACK & JOINT MONITORING - Satevis-Systems

APPLICATIONS // SUB-MILLIMETER DISPLACEMENT TELEMETRY

WIRELESS CRACK,
FRACTURE & EXPANSION
JOINT MONITORING

Replace manual caliper readings and fragile wired loggers with autonomous wireless crack meters. Pair Satevis® Alpha-INC LoRaWAN® nodes with plug-and-play Easy-Sense linear displacement sensors for sub-millimeter tracking over 7+ years.

Submit a Project
DIAGNOSTIC CHALLENGES / AUTOMATED TELEMETRY

CRACK & JOINT MONITORING.

Structural cracks evolve dynamically under thermal cycles and settlement, requiring continuous telemetry over manual checks.

01 Challenge — 01

Slow Progression vs. Sudden Rupture

Plastic tell-tale gauges only show past movement during periodic visits, missing sudden crack acceleration caused by storms or nearby works. Easy-Sense Displacement Sensors track opening and closing continuously with 0.01 mm resolution and 3-level alarms.

02 Challenge — 02

Combined Tilt & Opening

A widening structural crack is almost always accompanied by wall rotation or foundation settlement that a standalone crack meter misses. Pairing a Satevis® Alpha-Inc with an external crack gauge captures both 2D/3D tilt (0.001°) and linear displacement on a single node.

03 Challenge — 03

Thermal vs. Structural Drift

Concrete and masonry naturally expand and contract with daily and seasonal temperature swings, often masking real structural degradation. Synchronized temperature and humidity logging lets engineers separate reversible thermal breathing from irreversible structural cracking.

THE EASY-SENSE ADVANTAGE

PLUG-AND-PLAY SENSOR FUSION WITH EMBEDDED 15-BIT ADC

Eliminate bulky multi-channel data loggers and external solar cabinets. The Satevis® Easy-Sense architecture transforms any Satevis® Alpha-Inc wireless inclinometer into a dual-parameter Tilt + Crack Displacement node via a single waterproof M8 connector.

01 Transducer Layer

IP66 Linear Displacement Gauges

Engineered in rugged anodized aluminum, Satevis® Easy-Sense Displacement Sensors mount directly across active structural cracks, bridge expansion joints, or diaphragm walls.

  • Ball-Joint (BJ): 10 mm to 400 mm stroke (absorbs shear misalignment)
  • Spring-Return (SR): 10 mm to 100 mm stroke (no drilling on opposite side)
  • Precision: ≤ ±0.1% FS independent linearity & infinite resolution
02 Smart Digitizer

Embedded 15-Bit ADC & Flash Memory

Unlike raw analog probes vulnerable to cable noise, the Easy-Sense interface digitizes the displacement signal directly inside the sensor cable assembly and powers the probe via 3.3V DC.

  • 15-Bit ADC: Sub-millimeter digital conversion immune to EMI
  • Onboard Flash: Stores factory calibration, zero-offset & serial ID
  • Edge Alarms: 3-level local thresholds (Minor / Severe / Critical)
03 Wireless Node

Satevis® Alpha-Inc LoRaWAN® Node

Once plugged into a Satevis® Alpha-Inc (10T or 30B), the external crack gauge is automatically recognized. A single payload transmits synchronized tilt, crack opening, and temperature.

  • Simultaneous Logging: 0.001° tilt + linear stroke + ambient °C
  • Ultra-Low Power: Up to 7+ years battery autonomy in the field
  • Open Ecosystem: Native integration with Satevis® Cloud, TTN & ChirpStack
Single-Node Telemetry

Zero field wiring: Plug the M8 connector to stream multi-sensor frames.

SAT-EASY-SENSE-DISP → M8 4-Pin (3.3V + 15-Bit) → Alpha-Inc LoRaWAN®
PLUG-AND-PLAY M8 SENSOR FUSION

SATEVIS® EASY-SENSE DISPLACEMENT SENSORS

Four industrial linear potentiometers with embedded 15-bit digitization and flash calibration memory, engineered to plug directly into Satevis® Alpha-Inc LoRaWAN® wireless inclinometers.

SAT-EASY-SENSE-DISP-BJ Displacement Sensor with Ball Joint
BALL-JOINT • LONG STROKE IP66
REF: SAT-EASY-SENSE-DISP-BJ

Easy-Sense DISP-BJ (10–400 mm)

Wide-stroke linear displacement sensor with dual self-aligning ball joints for large expansion joints and active structural faults.

  • Measurement Stroke: 10 mm to 400 mm
  • Linearity: Down to ±0.05% (>200 mm)
  • Resolution: 0.0003 mm (10 mm) to 0.0134 mm (400 mm)
  • Lifespan: <0.01 mm repeatability • 100M movements
Learn More →
SAT-EASY-SENSE-DISP-BJ-02 Displacement Sensor with Ball Joint
BALL-JOINT • HIGH LINEARITY IP65
REF: SAT-EASY-SENSE-DISP-BJ-02

Easy-Sense DISP-BJ-02 (10–300 mm)

Cylindrical aluminum ball-joint displacement gauge delivering superior linearity across short and medium strokes.

  • Measurement Stroke: 10 mm to 300 mm
  • Linearity: ±0.05% (100–300 mm) / ±0.1% (10–50 mm)
  • Resolution: 0.0003 mm (10 mm) to 0.0101 mm (300 mm)
  • Interface: <0.01 mm repeatability • Easy-Sense memory
Learn More →
SAT-EASY-SENSE-DISP-BJ-03 IP67 Displacement Sensor with Ball Joint
BALL-JOINT • HARSH OUTDOOR IP67
REF: SAT-EASY-SENSE-DISP-BJ-03

Easy-Sense DISP-BJ-03 (50–300 mm)

Slim, high-ingress IP67 stainless/anodized ball-joint transducer built for exposed civil engineering joints and damp environments.

  • Measurement Stroke: 50 mm to 300 mm
  • Linearity: Constant ±0.125% FS across range
  • Resolution: 0.0017 mm (50 mm) to 0.0101 mm (300 mm)
  • Protection: IP67 waterproof + M8 4-pin connector
Learn More →
SAT-EASY-SENSE-DISP-SR Displacement Sensor with Spring Return
SPRING-RETURN PLUNGER IP66
REF: SAT-EASY-SENSE-DISP-SR

Easy-Sense DISP-SR (10–100 mm)

Spring-return contact probe with variable bracket mounting, ideal when drilling into the opposite side of a crack is not possible.

  • Measurement Stroke: 10 mm, 50 mm and 100 mm
  • Linearity: ±0.2% (100 mm) / ±0.5% (50 & 10 mm)
  • Resolution: 0.0003 mm (10 mm) to 0.0034 mm (100 mm)
  • Protection: IP66 rating • <0.01 mm repeatability
Learn More →
WIRELESS HOST NODE & SELECTION GUIDE

Pair any Easy-Sense gauge with a Satevis® Alpha-Inc LoRaWAN® Inclinometer

Compare all stroke-by-stroke resolutions in our official PDF Selection Guide or ask our engineers for a complete Alpha-Inc + Easy-Sense quote.

OFFICIAL SELECTION GUIDE DATA

EASY-SENSE DISPLACEMENT SELECTION MATRIX

Side-by-side comparison of the four Satevis® Easy-Sense linear displacement sensors: technology, stroke range, linearity, resolution per stroke, and ingress protection.

4 Models Main Features & Reference Click any SKU to open its dedicated product page.
SAT-EASY-SENSE-DISP-SR SAT-EASY-SENSE-DISP-SR Spring-Return Plunger
SAT-EASY-SENSE-DISP-BJ SAT-EASY-SENSE-DISP-BJ Ball-Joint (10 to 400 mm)
SAT-EASY-SENSE-DISP-BJ-02 SAT-EASY-SENSE-DISP-BJ-02 Ball-Joint (High Linearity)
SAT-EASY-SENSE-DISP-BJ-03 SAT-EASY-SENSE-DISP-BJ-03 Ball-Joint (IP67 Rugged)
01. Metrological & Mechanical Selection Guide
Sensor Technology Linear potentiometer with Spring Return Linear potentiometer with Ball-Joint Linear potentiometer with Ball-Joint Linear potentiometer with Ball-Joint
Measurement Stroke 10 mm, 50 mm and 100 mm 10 mm to 400 mm 10 mm to 300 mm 50 mm to 300 mm
Independent Linearity ±0.2% (100 mm)
±0.5% (50 mm, 10 mm)
±0.05% (>200 mm)
±0.1% (130–200 mm)
±0.2% (75–130 mm)
±0.5% (50 & 10 mm)
±0.05% (100–300 mm)
±0.1% (10–50 mm)
±0.125% across all strokes
Resolution by Stroke
  • 0.0003 mm (10 mm stroke)
  • 0.0017 mm (50 mm stroke)
  • 0.0034 mm (100 mm stroke)
  • 0.0003 mm (10 mm stroke)
  • 0.0017 mm (50 mm stroke)
  • 0.0034 mm (100 mm stroke)
  • 0.0050 mm (150 mm stroke)
  • 0.0067 mm (200 mm stroke)
  • 0.0084 mm (250 mm stroke)
  • 0.0101 mm (300 mm stroke)
  • 0.0117 mm (350 mm stroke)
  • 0.0134 mm (400 mm stroke)
  • 0.0003 mm (10 mm stroke)
  • 0.0017 mm (50 mm stroke)
  • 0.0034 mm (100 mm stroke)
  • 0.0050 mm (150 mm stroke)
  • 0.0067 mm (200 mm stroke)
  • 0.0084 mm (250 mm stroke)
  • 0.0101 mm (300 mm stroke)
  • 0.0017 mm (50 mm stroke)
  • 0.0034 mm (100 mm stroke)
  • 0.0050 mm (150 mm stroke)
  • 0.0067 mm (200 mm stroke)
  • 0.0084 mm (250 mm stroke)
  • 0.0101 mm (300 mm stroke)
Repeatability < 0.01 mm < 0.01 mm (100M movements) < 0.01 mm < 0.01 mm
Waterproofness IP66 IP66 IP65 IP67
02. Common Easy-Sense Digital Interface & LoRaWAN® Host Node Specifications
Embedded Digitizer & Memory Integrated 15-Bit Low-Noise ADC + onboard non-volatile Flash storing calibration coefficients, zero-offset, Serial ID & 3-level alarm thresholds
Connector & Power Supply Robust waterproof M8 4-Pin plug-and-play connector • Powered directly by the Satevis® Alpha-Inc host inclinometer (3.3V DC)
Wireless Telemetry (via Alpha-Inc) Open-standard LoRaWAN® V1.0.3 • Simultaneous transmission of Crack/Joint Displacement (mm) + 2D/3D Structural Tilt (0.001° res.) + Ambient Temperature (°C)
Back to content